Question: Do you need an electrician to install a pool?

Pool installation So, its generally a good idea to bring an electrician on board for any work that involves your power. If your planned pool includes a water heater, sand filter, pump or even mood lights, you should be speaking with an electrician.

Does pool installation include electrical?

This standard package would include: An electrical permit. Labor and materials to wire standard pool components, which include: pump, light, pump timer, and installing one GFCI (ground-fault circuit interrupter) receptacle plug 10–20 feet from the pool.

How much does it cost to install electrical for a pool?

Electricians charge $500.00 – $1500.00 to wire up an above-ground pool. Included in the cost should be all supplies. You will need an 18-inch deep trench to run the service from the breaker-box to the pool area.

Do you need an electrician to install an above-ground pool?

Pool pumps, which pump the water from the pool through the filter, use a lot of electricity, and that often requires the installation of a dedicated circuit. When you are preparing your above-ground pool installation, we recommend bringing in the assistance of a certified electrician.

What does a pool electrician do?

You may have an idea of what the problem could be, but its always a good idea to call a professional pool electrician. An electrician will be able to diagnose and fix any of your pools problems safely while ensuring that all other safety measures are in place and working as well.

What does pool installation include?

This process involves digging an 18-inch deep electrical trench, electrical work, building the pool, installing the liner, skimmer, and pump. Expect additional time and expense if you are installing a perimeter fence or a deck system.

What are the electrical requirements for an inground pool?

How Much Electricity Does Pool Equipment Use?Pool Pump: 240v, 10amps.Salt Water Chlorinator: 240v, approx 5-8 amps.Pool Heat Pump: 240v, 50 amps.LP/NG Pool Heater: 240v, 3 amps.Pool Lights: 12v, 3.5 watts each.Self-Contained Hot Tub: 240v 50 amps.Automatic Pool Cover: 220v, 5-7 amps OR 110v, 11-13 amps.Nov 30, 2018

How close can an electrical outlet be to a pool?

20 feet Electrical Outlet Receptacles Outlet receptacles for general use can be no closer than 20 feet from a pool or in-ground spa if they are not GFCI-protected, and no closer than 6 feet away if they are GFCI protected.

Do electricians fix pool lights?

You wont get a money-back warranty, you might need to buy more tools to get the job somewhat completed, and you definitely will need to call a licensed electrician if something goes terribly wrong, adding troubleshooting fees, and extra expenses to fix the problem you made even before the LED pool light installation

How do you run power to a pool?

Plug in the pool pump and cover it with a weatherproof cover. With the main service off to the house, wire in GFCI circuit breakers to the electrical panel. Connect an 8-gauge wire to the metal posts of the pool, the pump, and the metal plate on the skimmer and then wire that to the pump to bond the entire pool.

How expensive is an inground pool?

“The average person will spend around $45,000 on an in-ground pool.” This price usually covers excavation, concrete, interior materials, filtration, tiling, sanitisation, heating and lighting. Interior finishing in particular can bump up the price of an in-ground pool.

What kind of electrical is needed for a pool?

If you need to know the electrical requirements for your inground pool, here is a list of common pool equipment and the approximate volts and amps required for each: Pool Pump: 240v, 10amps. Salt Water Chlorinator: 240v, approx 5-8 amps. Pool Heat Pump: 240v, 50 amps.

How close can a pool be to a house?

National and Local Requirements There is a national standard that requires that all swimming pools must be at least 10 feet away from the house walls. As mentioned, this will protect electrical wiring from leaks, floods, and splashes.

How much does a 12x20 inground pool cost?

Inground Pool Sizes & PricesPool SizeVinylFiberglass10x20$18,200$23,40010x30$27,300$35,10012x16$17,472$22,46412x20$21,840$28,08018 more rows

What is a good size family pool?

For a family of 8 people, a pool size of 18 by 36 feet is adequate. Even if you all decide to swim at the same time, there will be enough space for everyone. A rectangular shape is the best choice for this size of the pool. If there are six or less in your family, a pool size of 16 by 32 feet will be sufficient.

How many hours per day should I run my pool pump?

8 hours a Overall, the lessons learned today is you should run your pool pump an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time. Residential pool water only needs to be turned over once daily to have proper filtration.

Should I leave my pool pump on all the time?

Although its generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. If your pool is in constant use, you may need to run the pump for up to eight hours per day, frequently checking the water clarity and chemical balance.

Contact us

Find us at the office

Duffle- Fyle street no. 48, 82141 Montevideo, Uruguay

Give us a ring

Tekayla Henchen
+74 935 689 322
Mon - Fri, 9:00-23:00

Join us